Language Selection

Get healthy now with MedBeds!
Click here to book your session

Protect your whole family with Orgo-Life® Quantum MedBed Energy Technology® devices.

Advertising by Adpathway

         

 Advertising by Adpathway

Jetboil Flash 1.0 Stove System Review

11 months ago 70

PROTECT YOUR DNA WITH QUANTUM TECHNOLOGY

Orgo-Life the new way to the future

  Advertising by Adpathway

The burner assembly and stove have been upgradedThe burner assembly and stove have been upgraded

The JetBoil Flash 1.0L Stove System is an improved version of the JetBoil Flash that boils water faster than the previous model and is safer and easier to use. The key difference between the two models is in the burner head assembly, which has a combined ignition and flame adjustment control that gets rid of the push button piezo lighter and wire flame control found on the previous model and combines them in a single knob. To light the stove you twist the knob to the left until it clicks to ignite the gas and to the right to control the flame height.

  • Weight: 14.1 oz without a fuel canister and with the fuel stand (which I recommend using)
  • Volume: 1.0L (max recommended liquid volume is 2 cups)
  • Pot: 1.0L anodized aluminum pot with flux ring
  • Stove: 5300 BTU
  • Regulated: No
  • Boil Time 2 cups: 120-130 sec
  • Water boiled: 10 liters per 100g Isobutane can

The BTU output of burner head was also increased, reducing the average time needed to boil 2 cups of water from 150 seconds down to 130-120 seconds. The locking points between the burner assembly and the flux ring were improved so you get a more secure fit between the two units and orange grip zones were added to the exterior of the burner head assembly so you can safely grip it when decoupling it from a hot pot or when screwing it onto a pressurized fuel canister.

The integrated Jetboil stove system in action.The integrated Jetboil Flash 1.0L stove system in action.

While all these changes make the new Jetboil Flash 1.0L faster to use and safer, I question whether its worth upgrading if you own one of the earlier Flash models and you’re used to its idiosyncrasies. However, if you’re looking to buy a Jetboil Flash for yourself or a friend, make sure you buy the new model which is called the “Jetboil Flash 1.0L” instead of the previous “Jetboil Flash.”

Jetboil Flash 1.0 Stove System

Jetboil Flash 101

If you’ve never used a Jetboil stove system before, the Jetboil Flash 1.0L is a tightly integrated cooking system that is optimized for boiling water very quickly and efficiently: like 16 oz (2 cups) in 2 minutes. It includes:

  • An anodized aluminum pot wrapped in an insulated cloth cover w/handle. The pot has aluminum fins welded to the bottom which absorb heat and reduce the amount of fuel required to boil water, by about 10%. The insulated cover has thermochromic stripes that turn orange when the water has reached a boiling temperature.
  • A burner head with a flame control and integrated piezo igniter so you can ignite it without matches.
  • A plastic lid that fits over the top of the pot, with a sipping hole and colander holes so you can strain water out of the pot.
  • A plastic measuring cup which fits over the base of the pot when packed (and is easily cracked.)
  • A fuel can stabilizer that helps prevent the top heavy system from tipping over.

The Jetboil Flash 1.0L is compatible with isobutane canister gas from multiple brands as long as it has a standard threaded valve. When packed, all of the stove components fit together into a cylinder that’s about the size of 32 oz Nalgene bottle. There’s also room inside for a 100g fuel canister, sold separately.

The entire stove and a 100g fuel canister can be packed into the pot for transport.The entire stove and a 100g fuel canister can be packed into the pot for transport.

There are a few things about the Jetboil Flash (both the new and the old versions) which aren’t obvious. While the cook pot can hold 1.0L of water, there’s an engraved line inside the pot called the fill line, which is just over 16 oz, and is the maximum recommended amount of water you’d want to boil at a time. If you try to boil more than that, there’s a real danger that water will boil over the top, which can burn you, or cause the entire unit to tip over.

If you’re very careful, you can simmer food in the Jetboil Flash, but it helps to stir it continuously when doing so. Otherwise, the food can float to the top of the pot and create a virtual lid, which can errupt unexpectedly and burn you or tip over. One strategy, is to boil water and turn the stove off, before adding ingredients that can rehydrate easily, like instant rice, in the cook pot..

Disclosure: Jetboil donated a Flash for review.

SectionHiker never accepts payment for gear reviews or editorial coverage. When you buy through affiliate links on our site, we may earn a small commission at no extra cost to you. Help us continue to test and write unsponsored and independent gear reviews, hiking and backpacking FAQs, and free hiking guides.

Read Entire Article

         

        

Start the new Vibrations with a Medbed Franchise today!  

Protect your whole family with Quantum Orgo-Life® devices

  Advertising by Adpathway